EDS-92 soil extensometer
The EDS-92 soil extensometer is used for monitoring displacement between two surfaces that may shift with respect to each other. It is widely used for monitoring of soil and rock movement in embankments and dams. The system contains a specially mounted model EDE-VXX vibrating wire displacement sensor, installed inside the protective tubing, fixed between two […]
EMA-11 rock bolt extensometer
EMA-11 measuring anchor, also known as rock bolt extensometer, is used to determine load exerted on rock bolts. It is a precision instrument designed to evaluate anchor system forces and their distribution within the length of the bolt and hence its safety and effectiveness. A digital caliper/micrometer depth gage with a resolution of 0.01 mm […]
EDJ-40V surface crack meter
This crack-joint meter is designed for surface joint measurement and consists of an EDE-VXX vibrating wire displacement transducer, fixed between anchors, installed on opposite sides of the crack-joint.
EDE-PXX LINEAR POTENTIOMETRIC DISPLACEMENT TRANSDUCER
EDE-PXX linear displacement transducer incorporates a potentiometric sensor. The application is same as that of EDE-VXX.
EDJ-50V embedment joint meter
The EDJ-50V is designed to measures movement between joints of concrete blocks in a concrete dam and is suitable for embedment applications. It consists of a plastic housing with a stainless steel flange on one end, and a stainless steel socket on the other. A vibrating wire displacement transducer inside the housing is connected to […]
EDJ-40T triaxial crack / joint meter
The triaxial joint meters with three EDE-VXX vibrating wire displacement sensors, flexible joints and accessories is available for monitoring joint movements in the X, Y & Z directions. A typical configuration using model EDE-VXX sensor is shown in the picture.
EDJ-40C UNIAXIAL SCALE TYPE MECHANICAL CRACK METER
The EDJ-40C crack meter is ideally suited for measuring the change in width of a surface crack to a resolution of 0.5 mm. It is integrated with a graduated scale and a transparent acrylic plate with a hairline cursor mark. The assembly when installed across the crack, the graduated scale and cursor move relative to […]
EDJ-40C2 BIAXIAL SCALE TYPE MECHANICAL CRACK METER
Model EDJ-40C2 is a biaxial mechanical crack meter with a marking of ±25 mm (x-axis) and ±10 mm (y-axis). It is ideally suited for measuring the change in width of a surface crack to a resolution of 0.5 mm, or shearing. EDJ-40C2 biaxial rack meter consists of a graduated scale with a resolution of 0.5 […]
EDJ-41M UNIAXIAL BOLT TYPE CRACK METER
The model EDJ-41M is used for monitoring of cracks, joints and fissures.It consists of two stainless steel round datum blocks that are installed on either side of the opening. Each datum block has a groove on the surface along the circumference to assist in taking readings. A through mounting hole helps mounting the datum block […]
EDJ-40TJ triaxial crack meter
Encardio-rite model EDJ-40TJ triaxial crack/joint meter is used for surface measurement. Surface crack/joint measurements can be made either on the surface or at locations accessible from galleries (in case of dam). EDJ-40TJ triaxial crack/joint meter for surface measurement consists of two precision machined elements attached to reinforce bar anchor stems. The precision elements are made […]
ESM-30V VW LIQUID LEVEL SETTLEMENT MONITORING SYSTEM
Model ESM-30V high sensitivity liquid level settlement measuring system is designed for remote measurement of minute differential settlement in tunnels, bridges and buildings with high precision. The system uses low range vibrating wire force transducer with a submersible cylinder suspended in fluid filled vessels interconnected in series by a fluid filled tube. All interconnected vessels […]
EHOS-35 HYDRAULIC OVERFLOW SETTLEMENT MONITORING SYSTEM
The model EHOS-35 hydraulic overflow settlement system is suitable for measurement of settlement or heave in an embankment of a dam or infills where the settlement cell (sensor) and terminal structure or observation room can be nearly at the same elevation. The hydraulic overflow settlement gage works on the ‘U’ tube principle. It consists of […]
3D SETTLEMENT WITH INCLINATION MONITORING SYSTEM
Encardio-rite model EAN-61MS in-place 3D inclinometer with settlement (IPIS) system is used wherever lateral movement along with settlement/heave is to be monitored in a borewell or on a structure. It finds wide application in the measurement of lateral movement and settlement in soil, earthworks, slopes or structures like retaining/diaphragm walls, embankment, deep foundations or dams […]
ETT-10V heavy duty temperature meter
The ETT-10V consists of a magnetic, high tensile strength, stretched wire fixed to a material with different coefficients of linear expansion. Any change in temperature directly affects the tension in the wire, and thus, its natural frequency of vibration. This temperature sensor is specially designed for measurement of internal temperature in concrete structures, soil or […]
ETT-10TH thermistor probe
The ETT-10TH is especially designed for measuring surface temperature of steel, concrete structures and of the temperature inside the concrete. This sensor also works efficiently when submerged under water. The ETT-10TH is a low mass waterproof temperature probe so it has a very fast response time.
Water measurement station
ETCD-30V / 60V water conductivity sensor
Model ECTD-30V and ECTD-60V CTD sensors are available for monitoring electrical conductivity, water level and temperature in the ground. These arerobust, marine grade sensors. Model ECTD-30V CTD probe comes with the model EPP-30V absolute pressure sensor and ECTD-60V CTD probe is with model EPP-60V absolute pressure sensor. The ESDL-30CTDB datalogger,that collects the data from these […]
ETT-10PT temperature probe
The ETT-10PT RTD consists of a ceramic resistance element (Pt 100) with DIN IEC 751 (formerly DIN 43760) European curve calibration. The probe is well suited for long-term installations due to its excellent stability and accuracy. The resistance element is housed in a closed end robust stainless steel tube that protects the element against moisture.
ERG-200 rain gauge
Model ERG-200/201 rain gage with a proven tipping bucket mechanism provides a cost effective and reliable method for measuring and recording rainfall. It is corrosion resistant having a stainless steel outer housing, designed for many years of trouble free operation. Each rain gage is individually calibrated for optimum accuracy. It comes with a SDI-12 interface […]
EAWS-101 weather station
Encardio-rite model EAWS-101 automatic web-based weather monitoring station provides a precise, reliable and cost effective means of recording meteorological data. The weather system consists of standard sensors for essential parameters. Other sensors are also available on request.Standard sensors used are briefly outlined below: Rain gauge with a proven tipping bucket mechanism Wind speed and direction […]