Reach M2 RTK GNSS- RECEIVER

EMLID Reach M2 is a multi-frequency RTK GNSS receiver with centimeter accuracy, eg for UAV use and object movement monitoring. The M2 is a very cost-effective solution for many purposes. Can be used with the free Reach View app (Android, iPhone and PC). The RTK correction signal can be obtained, for example, from another RS2 navigator (free of charge via the LoRa network with a separate modem), from a commercial VRS network or as free NTRIP correction data via the GSM network. M2 receivers are often used as base stations or drone measurements, using the PPK reception mode. There are also ready-made building kits from Mettatec for these purposes here.

Properties

RTK GNSS receiver dimensions 56.4 x 45.3 x 14.6 mm, weight 35 g
temperature range -20 C to +65 C
Static accuracy H 4 mm + 1 ppm, V 8 mm + 1 ppm
Kinematic accuracy H 7 mm + 1 ppm, V 14 mm + 1 ppm refresh rate 10 Hz GPS, 5 Hz GNSS
number of channels 184 signals GPS / QZSS L1C7A, L2C, GLONASS L1OF, L2OF, BeiDou B1l, B2l, Galileo E1-B / C, E5b
IMU 9DOF
USB OTG
RINEX with up to 20 Hz refresh rate * * with software update, now 10 Hz
correction signals NTRIP, VRS, RTCM3
output data formats NMEA, LLH / XYZ
Micro-USB cable
JST-GH 6-pin cable
JST-GH 5-pin cable
LoRa radio (sold separately):
- Frequency range 868/915 MHz
- Distance up to 8 km
- Wi-Fi 802.11b / g / n
- Bluetooth 4.0 / 2.1 EDR
- Output ports USB, UART, measuring pulse